Professional Tower Packing Manufacturer 25mm 38mm 50mm 80mm Ceramic Pall Ring Packing for Scrubbing Tower

• Customization: Available
• Material: Ceramic
• Type: Random Packing
• Usage: Chemical Industry Product, Sewage Treatment
• Effect: Adjust The Viscosity of Resin
• Source: Particle
• Transport Package: Woven Bags
• Specification: 25mm, 38mm, 50mm, 76mm
• Trademark: Sanhe
• Origin: Pingxiang
• HS Code: 3926909090
• Production Capacity: 1000t/Month

Product Description

Ceramic Pall Ring
 

The ceramic ball ring packing produced by Sanhe Ceramics is made of high-quality kaolin and scientific formula, and optimizes the mass transfer efficiency of traditional ring packing through innovative structural design. Its side wall window structure and evenly distributed internal rib design can significantly increase the gas-liquid contact area, promote uniform distribution of fluid, and reduce system pressure drop. At the same time, it has the characteristics of high temperature resistance, corrosion resistance, and high compressive strength. It is suitable for chemical absorption towers, environmental waste gas treatment devices, pharmaceutical distillation systems and other scenarios.

Advantages and characteristics

This ceramic packing has significant advantages: the innovative combination of side wall windows and internal ribs breaks the traditional limitations, promotes efficient contact between gas and liquid, optimizes mass transfer performance, and reduces system pressure drop; it uses selected kaolin to be sintered at high temperature to form a dense structure that is corrosion-resistant and temperature-resistant, and can adapt to complex working conditions; it has both high porosity and reliable mechanical properties, is wear-resistant, and has a long service life; the entire production process is standardized and controlled to ensure batch stability, and is suitable for tower equipment in multiple fields.

Technical indicators
1. Chemical composition
 

Composition	SiO	Al2O3	Fe2O3	CaO	K2O+Na2O
content %	>70	23-28	<1	<1-2	<2-4

 

2. Physical properties
 

Item	Density g/cm3	Water Absorption Rate %	compressive strength N/mm	Mohs hardness Scale	Temperature resistance ºC	Acid resistance %	Alkaline resistance %
index	2.25-2.4	<0.5	≥4.4	7-8	≥1000	>99.8	>90

3. Specifications and parameters

 

 

Specificationsmm	Diameter x Height x Wall Thicknessmm	Specific Surface Area m^2/m^3	Void Ratio %	Bulk Density kg/m^3	Number of Packed Units per/m^3	Dry Packing Factor m^-1
Φ25	25×15×3	210	73	630	36000	540
Φ38	38×38×4	140	75	590	12000	332
Φ50	50×50×5	100	78	520	4900	210
Φ76	76×76×9	70	80	470	1500	137

Application scope
This product has a wide range of applications and is used in many industries such as chemical industry, environmental protection, pharmaceuticals, energy, metallurgy, etc. It can be used in gas absorption, waste gas treatment, distillation and purification and other process scenarios. It can adapt to working conditions such as highly corrosive media, high temperature, high pressure and complex fluids, and is suitable for various related devices such as packed towers, reaction devices, environmental protection equipment, energy devices, etc.

Notes
Packaging: Use shockproof wooden boxes or pallets for reinforcement, fill with cushioning materials, mark the model, quantity, and "fragile" and "upward" signs, and clearly define the stacking height limit.
Transportation: Handle with care during loading and unloading, and do not throw or squeeze. Vehicles must be protected from rain. It is recommended to use vehicles with shock absorbers for long-distance transportation to reduce the risk of fragmentation.
Storage: Store in a dry and ventilated indoor warehouse, away from corrosive substances, avoid direct sunlight and rain, and do not stack above the limit. The bottom layer should be covered with moisture-proof pallets.
Use: Check integrity before installation and remove damaged parts; fill in layers evenly, and do not trample or scatter; check and clean regularly under special working conditions, and do not use beyond the design range.

Technical and service support
Selection and solution design: Provide selection suggestions based on parameters, assist in optimizing process design, and balance mass transfer efficiency and pressure drop.
Installation guidance service: Provide filling specifications and guide the compatibility inspection of supporting equipment (remote or on-site).
Operation and maintenance support: Answer questions such as scaling and blockage, and provide periodic inspection suggestions.
Working condition optimization suggestions: Analyze abnormal working conditions and provide improvement strategies, evaluate service life and replacement cycle.
 

 

 

About us

Pingxiang Sanhe Ceramics Co., Ltd.

Pingxiang Sanhe Ceramics Co., Ltd. lies in Pingxiang city, Jiangxi province, which belongs to one of the five ceramic production export bases in China. The company is a private technology share ceramics manufacturing enterprise founded in 2004. We specialize in honeycomb ceramic plates, honeycomb ceramics heat accumulators, honeycomb ceramic honeycomb substrates, ceramic foam filter and other producing energy conservation and environmental protection series ceramic products. 

     Sanhe Ceramics has successfully passed all kinds of certifications such as ISO9001 ISO14001, OHSAS18001 and so on, as well as established perfect quality control system and quality assessment system. Our company has been strictly controlled the whole manufactring system from production planning, processing control to maintenance of equipment as well as from raw material warehousing to quality test of finished products, We offer Stable and qualified products to customers from all over the world. Superiority, uniformity and environmental friendliness of its quality has gained great reputation among all customers. We obey the research and development design production idea of specialization, standardization, internationalization and technicalization, striving to make the products of the company more perfect with stronger customer base.

     Sanhe ceramics Co.,Ltd keeps the faith of "First impression is the last impression" and provides the best quality and comfortable service to all the buyers, No matter the deal is big or small, we are warmly welcome your coorperation. Any inquiries pls contact with us!