Thermal Storage Honeycomb Ceramic

• Customization: Available
• Application: Refractory, Structure Ceramic, Industrial Ceramic
• Material: Alumina Ceramic
• Model NO.: Sanhe RTO HC
• Type: Ceramic Tubes
• Transport Package: Hard Carton or Wooden Carton with Pallet
• Specification: Cordierite/Alumuina/ Carbide
• Trademark: Sanhe
• Origin: Jiangxi Province, China
• HS Code: 6909110000
• Production Capacity: 800, 00pieces/Month

Product Description

High Temperature Honeycomb Ceramic Monolith Heat Storage Exchanger ceramic substrates block for RTO
The monolithic honeycomb ceramic exchanger produced by Sanhe Ceramics Co., Ltd. in Pingxiang , Jiangxi Province adopts advanced molding technology and high-temperature sintering technology, and has the characteristics of large specific surface area, high heat exchange efficiency, and strong thermal shock resistance. The internal honeycomb structure of the heat storage body is uniform and dense, and has the advantages of high temperature resistance, corrosion resistance and long life. It can be widely used in waste heat recovery systems in industrial kilns, waste gas treatment and other fields. 
 

Advantages and characteristics
1. High specific surface area design: honeycomb regular pore structure provides a larger specific surface area, optimizes airflow distribution, and enhances the heat exchange efficiency between the heat storage body and the medium.
2. Excellent thermal shock resistance: adopts high-temperature sintering technology and special formula to withstand rapid cooling and heating conditions, and reduce the risk of material loss caused by drastic temperature changes.
3. High temperature and corrosion resistance: The material is stable and can adapt to high temperature environments above 1000ºC for a long time, and has good corrosion resistance to acidic and alkaline exhaust gases.
4. Efficient heat recovery capability: The low flow resistance design of the honeycomb channel, combined with the rapid heat storage/release characteristics, helps the industrial waste heat recovery system to achieve heat energy recycling.
5. Long service life: The densified structure reduces channel blockage, and with strict quality inspection procedures, it ensures the long-term stable operation of the product under complex working conditions.
6. Energy-saving and environmental protection characteristics: By improving the efficiency of waste heat recovery, it effectively reduces industrial energy consumption, helps enterprises reduce carbon emissions, and meets the needs of green production.
7. Wide adaptability: With a complete range of specifications and models and a high degree of customization, it can be adapted to diversified application scenarios such as industrial kilns, RTO/RCO exhaust gas treatment, and steel metallurgy.

Technical indicators
 1. Chemical composition
 

Component	Unit	Index
SiO2	%	≤29
Al2O3	%	≥63
MgO	%	<5
Fe2O3	%	<1.5

2. Physical properties
 

Item	Unit	Index
Material		Mullite
Specific gravity	g/cm3	2.0-2.5
Water absorption	%	15-20
Average thermal expansion coefficient	10-6/K(20-800ºC)	4.5-6.5
Thermal conductivity	W/m · K( 20-1000ºC )	1.5-2.0
Thermal efficiency	%	95
Maximum operating temperature	ºC	1350
Instantaneous impact temperature	ºC	1450
Specific heat capacity	J/Kg·K	≥1250
Compressive strength Thermal shock resistance △T	Mpa	Axial ≥28
	Mpa	Lateral ≥8
Material	ºC/Min	≥300 (no cracking after three cycles)

3. Specifications and dimensions
 

Specifications (mm)	Number of holes	Wall thickness (mm)	Outer wall thickness( mm )	Pore width  ( mm )	Porosity	Specific surface area (/m³)	Product weight (kg)
150x150x300	25x25	1.0±0.1	1.2±0.15	4.8-5.0	68%	580	4.0-5.0Kg
150x150x150	25x25	1.0±0.1	1.2±0.15	4.8-5.0	68%	580	2.0-2.5Kg
150x150x300	32x32	0.9±0.1	1.2±0.15	3.8-3.9	66%	724	4.2-5.2Kg
150x150x150	32x32	0.9±0.1	1.2±0.15	3.8-3.9	66%	724	2.1-2.6Kg
150x150x300	40x40	0.7±0.1	1.1±0.15	2.9-3.1	63%	880	4.2-5.2Kg
150x150x150	40x40	0.7±0.1	1.1±0.15	2.9-3.1	63%	880	2.1-2.6Kg
150x150x300	43x43	0.65±0.1	1.0±0.15	2.7-2.9	67%	1000	4.6-5.6Kg
150x150x150	43x43	0.65±0.1	1.0±0.15	2.7-2.9	67%	1000	2.3-2.8Kg
150x150x300	50x50	0.6±0.1	0.90±0.15	2.3-2.5	64%	1090	4.8-5.8Kg
150x150x150	50x50	0.6±0.1	0.90±0.15	2.3-2.5	64%	1090	2.4-2.9 Kg

4. Tolerance range

Specifications and dimensions	Length(mm)	Width(mm)	Height(mm)
150mm	150±2.0	150±2.0	150±2.0
300mm	150±2.0	150±2.0	300±3.0

Application scope
1. Applicable industries
Industrial kiln field: regenerative high-temperature combustion systems in steel, nonferrous metallurgy, ceramics, glass, cement and other industries.
Waste gas treatment field: RTO (regenerative thermal oxidizer) and RCO (regenerative catalytic oxidizer) waste gas purification devices in petrochemical, chemical, spraying, printing and other industries.
Energy recovery field: waste heat recovery system of gas turbines, boilers, coke ovens and other equipment.

2.Applicable working conditions
High temperature environment: long-term tolerance of high-temperature flue gas above 1000ºC, and adapt to frequent alternating hot and cold working conditions.
Complex media: suitable for industrial waste gas environments containing acidic/alkaline components, dust particles, etc.
High flow rate scenario: honeycomb structure design can withstand higher gas flow rate and reduce system pressure loss.

3.Applicable devices
Regenerative combustion system (RBS): used for efficient regenerative combustion of industrial kilns to improve fuel utilization.
RTO/RCO waste gas treatment equipment: storage and recycling of waste gas heat energy through honeycomb ceramic heat storage body.
Waste heat boiler/hot blast furnace: recovery of high-temperature flue gas waste heat, conversion into steam or preheating of combustion air.
Steel metallurgical equipment: flue gas waste heat recovery system of converter, electric furnace, and steel rolling heating furnace.
 

 

Notes
1. Packaging requirements: moisture-proof and shock-proof packaging is used. It is recommended to use wooden frames or pallets to fix them to avoid collision and breakage during transportation; the outer packaging must be clearly marked with "fragile" and "upward" signs, and product specifications and batch information must be attached.
2. Transportation specifications: During transportation, the goods must be stably fixed to avoid severe bumps or high-altitude falls; it is prohibited to mix with corrosive chemicals, and the whole process must be protected from rain, moisture, and exposure.
3. Storage conditions: It should be stored in a dry and ventilated indoor environment to avoid direct contact with the ground. It is recommended to use pallets to raise it; during long-term storage, the integrity of the packaging must be checked regularly, and the stacking height should not exceed 2 layers to prevent the bottom from being compressed and damaged.
4. Instructions for use: Before installation, check whether the surface of the heat storage body is intact and free of cracks. It is strictly forbidden to use damaged products; pre-drying treatment must be carried out according to process requirements for the first use to avoid thermal stress cracking caused by rapid cooling and heating; flue gas temperature, composition and pressure difference must be monitored during operation to avoid long-term overheating or overload.

Technical and service support
1. Installation guidance: Provide product installation solution design, module assembly process guidance and equipment adaptability suggestions to assist customers in optimizing system configuration.
2. Operation and maintenance support: Regularly visit the equipment operation status, and provide maintenance suggestions such as heat storage body cleaning and channel dredging to extend service life.
3. Technical consultation response: Professional team supports working condition adaptation analysis (such as temperature, flue gas composition, heat load, etc.), and responds to technical consultation needs within 48 hours.
4. Spare parts supply guarantee: Standardized products are always in stock, and non-standard customized products are scheduled on demand to ensure efficient delivery.
5. Operation training: Provide product performance parameters, operating specifications and troubleshooting manuals, and guide safe operation remotely or on-site.
6. Customized solution design: Provide heat storage body specification adjustment and structure optimization services according to customer's furnace size, thermal efficiency requirements and other needs.
After-sales problem tracking: Establish customer service files

About us
     Pingxiang Sanhe Ceramics Co., Ltd. lies in Pingxiang city, Jiangxi province, which belongs to one of the five ceramic production export bases in China. The company is a private technology share ceramics manufacturing enterprise founded in 2004. We specialize in honeycomb ceramic plates, honeycomb ceramics heat accumulators, honeycomb ceramic honeycomb substrates, ceramic foam filter and other producing energy conservation and environmental protection series ceramic products. 

     Sanhe Ceramics has successfully passed all kinds of certifications such as ISO9001 ISO14001, OHSAS18001 and so on, as well as established perfect quality control system and quality assessment system. Our company has been strictly controlled the whole manufactring system from production planning, processing control to maintenance of equipment as well as from raw material warehousing to quality test of finished products, We offer Stable and qualified products to customers from all over the world. Superiority, uniformity and environmental friendliness of its quality has gained great reputation among all customers. We obey the research and development design production idea of specialization, standardization, internationalization and technicalization, striving to make the products of the company more perfect with stronger customer base.

     Sanhe ceramics Co.,Ltd keeps the faith of "First impression is the last impression" and provides the best quality and comfortable service to all the buyers, No matter the deal is big or small, we are warmly welcome your coorperation. Any inquiries pls contact with us!