Ceramic Intalox Saddle Ring
The ceramic intalox saddle ring packing produced by Sanhe Ceramics is made of high-quality kaolin and scientific formula through high-temperature sintering process. Its unique saddle-shaped curved surface structure design combines the mechanical strength of annular packing with the fluid mechanics advantages of saddle-shaped packing. Through the combination of arc surface and internal multi-directional openings, it significantly enhances the gas-liquid contact area, promotes uniform distribution of fluid, reduces system pressure drop, and improves mass transfer and separation efficiency.
Advantages and characteristics
This ceramic packing has a unique saddle-shaped curved surface and multi-directional opening design, which increases the gas-liquid contact area, reduces wall flow, and has high mass transfer efficiency; high-quality kaolin is sintered into a dense structure at high temperature, with strong corrosion resistance and temperature resistance, and is suitable for high temperature and highly corrosive environments; the fluid mechanics performance is optimized, adapted to high flow rate conditions, reliable mechanical strength, good surface characteristics, strict production standards, and is suitable for complex mass transfer needs in multiple fields.
Technical indicators
1. Chemical composition
| Composition |
SiO |
Al2O3 |
Fe2O3 |
CaO |
K2O+Na2O |
| content % |
>70 |
23-28 |
<1 |
<1-2 |
<2-4 |
2. Physical properties
| Item |
Density
g/cm3 |
Water Absorption Rate
% |
compressive strength
N/mm |
Mohs hardness
Scale |
Temperature resistance
ºC |
Acid resistance
% |
Alkaline resistance
% |
| index |
2.25-2.4 |
<0.5 |
≥4.4 |
7-8 |
≥1000 |
>99.8 |
>90 |
3. Specifications and parameters
| Specificationsmm |
Diameter x Height x Wall Thicknessmm |
Specific Surface Area
m2/m3 |
Void Ratio
% |
Bulk
Density
kg/m3 |
Number of Packed
Units
per/m3 |
Dry
Packing Factor
m-1 |
| Φ16 |
16×16×3 |
250 |
66 |
820 |
178000 |
870 |
| Φ25 |
25×25×3 |
147 |
78 |
510 |
42000 |
310 |
| Φ38 |
38×38×4 |
100 |
80 |
458 |
12000 |
195 |
| Φ50 |
50×50×5 |
80 |
81 |
465 |
5600 |
156 |
| Φ76 |
76×76×9 |
62 |
75 |
575 |
1700 |
147 |
Application scope
This product has a wide range of applications and is used in many industries such as chemical industry, environmental protection, pharmaceuticals, energy, metallurgy, etc. It can be used in gas absorption, waste gas treatment, distillation and purification and other process scenarios. It can adapt to working conditions such as highly corrosive media, high temperature, high pressure and complex fluids, and is suitable for various related devices such as packed towers, reaction devices, environmental protection equipment, energy devices, etc.
Notes
Packaging: Use shockproof wooden boxes or pallets for reinforcement, fill with cushioning materials, mark the model, quantity, and "fragile" and "upward" signs, and clearly define the stacking height limit.
Transportation: Handle with care during loading and unloading, and do not throw or squeeze. Vehicles must be protected from rain. It is recommended to use vehicles with shock absorbers for long-distance transportation to reduce the risk of fragmentation.
Storage: Store in a dry and ventilated indoor warehouse, away from corrosive substances, avoid direct sunlight and rain, and do not stack above the limit. The bottom layer should be covered with moisture-proof pallets.
Use: Check integrity before installation and remove damaged parts; fill in layers evenly, and do not trample or scatter; check and clean regularly under special working conditions, and do not use beyond the design range.
Technical and service support
Selection and solution design: Provide selection suggestions based on parameters, assist in optimizing process design, and balance mass transfer efficiency and pressure drop.
Installation guidance service: Provide filling specifications and guide the compatibility inspection of supporting equipment (remote or on-site).
Operation and maintenance support: Answer questions such as scaling and blockage, and provide periodic inspection suggestions.
Working condition optimization suggestions: Analyze abnormal working conditions and provide improvement strategies, evaluate service life and replacement cycle.
About us
Pingxiang Sanhe Ceramics Co., Ltd.
Pingxiang Sanhe Ceramics Co., Ltd. lies in Pingxiang city, Jiangxi province, which belongs to one of the five ceramic production export bases in China. The company is a private technology share ceramics manufacturing enterprise founded in 2004. We specialize in honeycomb ceramic plates, honeycomb ceramics heat accumulators, honeycomb ceramic honeycomb substrates, ceramic foam filter and other producing energy conservation and environmental protection series ceramic products.
Sanhe Ceramics has successfully passed all kinds of certifications such as ISO9001 ISO14001, OHSAS18001 and so on, as well as established perfect quality control system and quality assessment system. Our company has been strictly controlled the whole manufactring system from production planning, processing control to maintenance of equipment as well as from raw material warehousing to quality test of finished products, We offer Stable and qualified products to customers from all over the world. Superiority, uniformity and environmental friendliness of its quality has gained great reputation among all customers. We obey the research and development design production idea of specialization, standardization, internationalization and technicalization, striving to make the products of the company more perfect with stronger customer base.
Sanhe ceramics Co.,Ltd keeps the faith of "First impression is the last impression" and provides the best quality and comfortable service to all the buyers, No matter the deal is big or small, we are warmly welcome your coorperation. Any inquiries pls contact with us!
Audited Supplier 
){kind=link}