Ceramic Raschig Ring
Ceramic Raschig Ring produced by Sanhe Ceramics is made of selected kaolin as the basic raw material, combined with scientific proportions and advanced technology. The product adopts an annular hollow structure design to effectively improve the gas-liquid contact efficiency and enhance the mass transfer and separation performance.
Advantages and characteristics
The ceramic filler adopts a scientific ratio of selected kaolin and inorganic materials, and forms a stable crystal structure through high-temperature sintering, which is resistant to acid and alkali corrosion and suitable for highly corrosive environments. Its unique annular hollow structure and surface micropore distribution optimize the gas-liquid contact, improve the mass transfer and separation efficiency and reduce the system pressure drop, and can work stably at high temperatures and withstand thermal shock. The product has enhanced density through gradient sintering, strong compression and wear resistance, no aging risk for inorganic materials, chemical corrosion resistance, long service life, reduced maintenance and cost. At the same time, strict process standards are implemented in production to ensure batch consistency and meet the stability requirements of complex working conditions.
Technical indicators
1. Chemical composition
| Composition |
SiO |
Al2O3 |
Fe2O3 |
CaO |
K2O+Na2O |
| content % |
>70 |
23-28 |
<1 |
<1-2 |
<2-4 |
2. Physical properties
| Item |
Density
g/cm3 |
Water Absorption Rate
% |
compressive strength
N/mm |
Mohs hardness
Scale |
Temperature resistance
ºC |
Acid resistance
% |
Alkaline resistance
% |
| index |
2.25-2.4 |
<0.5 |
≥4.4 |
7-8 |
≥1000 |
>99.8 |
>90 |
3. Specifications and parameters
| Specificationsmm |
Diameter x Height x Wall Thicknessmm |
Specific Surface Area
m2/m3 |
Void Ratio
% |
Bulk
Density
kg/m3 |
Number of Packed
Units
per/m3 |
Dry
Packing Factor
m-1 |
| Φ16 |
16×16×3 |
250 |
66 |
820 |
178000 |
870 |
| Φ25 |
25×25×3 |
147 |
78 |
510 |
42000 |
310 |
| Φ38 |
38×38×4 |
100 |
80 |
458 |
12000 |
195 |
| Φ50 |
50×50×5 |
80 |
81 |
465 |
5600 |
156 |
| Φ76 |
76×76×9 |
62 |
75 |
575 |
1700 |
147 |
Application scope
This product has a wide range of applications and is used in many industries such as chemical industry, environmental protection, pharmaceuticals, energy, metallurgy, etc. It can be used in gas absorption, waste gas treatment, distillation and purification and other process scenarios. It can adapt to working conditions such as highly corrosive media, high temperature, high pressure and complex fluids, and is suitable for various related devices such as packed towers, reaction devices, environmental protection equipment, energy devices, etc.
Notes
Packaging: Use shockproof wooden boxes or pallets for reinforcement, fill with cushioning materials, mark the model, quantity, and "fragile" and "upward" signs, and clearly define the stacking height limit.
Transportation: Handle with care during loading and unloading, and do not throw or squeeze. Vehicles must be protected from rain. It is recommended to use vehicles with shock absorbers for long-distance transportation to reduce the risk of fragmentation.
Storage: Store in a dry and ventilated indoor warehouse, away from corrosive substances, avoid direct sunlight and rain, and do not stack above the limit. The bottom layer should be covered with moisture-proof pallets.
Use: Check integrity before installation and remove damaged parts; fill in layers evenly, and do not trample or scatter; check and clean regularly under special working conditions, and do not use beyond the design range.
Technical and service support
Selection and solution design: Provide selection suggestions based on parameters, assist in optimizing process design, and balance mass transfer efficiency and pressure drop.
Installation guidance service: Provide filling specifications and guide the compatibility inspection of supporting equipment (remote or on-site).
Operation and maintenance support: Answer questions such as scaling and blockage, and provide periodic inspection suggestions.
Working condition optimization suggestions: Analyze abnormal working conditions and provide improvement strategies, evaluate service life and replacement cycle.
Pingxiang Sanhe Ceramics Co., Ltd.
Pingxiang Sanhe Ceramics Co., Ltd. lies in Pingxiang city, Jiangxi province, which belongs to one of the five ceramic production export bases in China. The company is a private technology share ceramics manufacturing enterprise founded in 2004. We specialize in honeycomb ceramic plates, honeycomb ceramics heat accumulators, honeycomb ceramic honeycomb substrates, ceramic foam filter and other producing energy conservation and environmental protection series ceramic products.
Sanhe Ceramics has successfully passed all kinds of certifications such as ISO9001 ISO14001, OHSAS18001 and so on, as well as established perfect quality control system and quality assessment system. Our company has been strictly controlled the whole manufactring system from production planning, processing control to maintenance of equipment as well as from raw material warehousing to quality test of finished products, We offer Stable and qualified products to customers from all over the world. Superiority, uniformity and environmental friendliness of its quality has gained great reputation among all customers. We obey the research and development design production idea of specialization, standardization, internationalization and technicalization, striving to make the products of the company more perfect with stronger customer base.
Sanhe ceramics Co.,Ltd keeps the faith of "First impression is the last impression" and provides the best quality and comfortable service to all the buyers, No matter the deal is big or small, we are warmly welcome your coorperation. Any inquiries pls contact with us!
Audited Supplier 
){kind=link}